galaxy银河国际(中国)有限公司

How to strengthen the viscosity of polyethylene anti-corrosion tape

Time:2019-07-25 09:47:57

Polyethylene anti-corrosion tape is mainly used for anti-corrosion of pipes. It depends on the quality of the tape mainly depends on its viscosity. How do we strengthen the viscosity of polyethylene anti-corrosion tape? Let's share a few points.

1, pay attention to temperature control

When constructing polyethylene tape, pay special attention to temperature control. If the temperature is too low, it is necessary to raise the surface of the pipe or the temperature of the tape itself, for example, using infrared heating.

2, pay attention to the coating temperature

In order to ensure the viscosity, it should be noted that the coating temperature of the polyethylene anti-corrosion tape should not be too low, and it should be kept within the range of 20 to 40 ° C. Generally, the bonding strength of the tape is also good.

3, do a good job of storage

In order to make the viscosity of the polyethylene anti-corrosion tape better, it is necessary to pay special attention to the storage environment. Generally speaking, it is good to control the humidity in the range of 60% to 70% RH.

All rights reserved © 2016 Ningbo anda anticorrosive material technology co., LTDTechnical support:yingxun Network technology